DOB – Double Layer Protection

Scratch-resistant and wear-resistant: Tested using a screwdriver scratch test—DOB packaging showed no abnormality, unlike GOB packaging.

Test object: GOB packaging process products

Test method: Use a screwdriver to scratch the surface of the two products with the same force

Test results: There are scratch marks on the surface of GOB packaging process products

There is no abnormality on the surface of DOB packaging process products.

Wear resistance test: Passed ISO15184 pencil method test with a 3H rating.

Testing standard: (Pencil method) 1SO15184

Test results: Wear resistance 3H (PASS)

First-class touch and highly wear-resistant surface.

Waterproof and moisture-proof: Utilizes an elastic principle that resists extreme temperatures and environmental stress. Features a 360° waterproof ring for first-level protection, with no water seepage for more than 8 hours.

Utilizing the elastic principle of thermal expansion and contraction of the adhesive layer, it can resist external hot and cold environments and product internal stress changes and has excellent environmental adaptability. It has an all-round 360° waterproof ring design, front and back first-level protection, and is super waterproof and moisture-proof.

Test results: No water seepage for more than 8 hours.

Salt spray resistance: A 72-hour artificial salt spray exposure test showed no corrosion on the module surface.

Experimental objects: DOB packaging process products

Experimental methods: Artificial simulated salt spray environment test, salt spray test chamber, create salt spray environment and evaluate the quality of the module's salt spray corrosion resistance.

Duration: 72H

Experimental results: There is no corrosion on the module surface.

Anti-static properties: Passed a 12KV human body + mechanical mode test with no abnormalities, ensuring stable lighting.

Experimental objects: DOB packaging process products

Experimental method: 12KV human body + mechanical mode

Experimental results: no abnormality, can light up normally.

High and low temperature resistance: The elastic adhesive layer adjusts stress with temperature fluctuations. Passed 200 rounds of hot and cold shock tests from -40°C to 85°C without deformation or cracks.

The middle layer is an elastic colloid, the light-transmitting adhesive layer is based on silicone plastic SPE, which has good elasticity and toughness in the solid state; using temperature change technology, this elastic adhesive layer will adjust its stress according to temperature changes, making it always Protect lamp beads with extremely low internal stress, under high-intensity pressure. It has extremely low deformation under strong pressure and will never crack. It can withstand 200 rounds of hot and cold shock tests from -40C to 85C. lt's adaptable to most common environments and is not always cold. The deformation is small at low temperatures the ambient temperature returns to normal temperature. It can be restored after being put down, and it will not deform or expand at high temperatures.

No blue light, no ultraviolet: Features an anti-blue light layer that reduces blue light exposure, ensuring less than 10% yellowing over 72 hours and maintaining stable LED module colors for over 5 years.

An anti-blue light layer is provided between the light-transmitting adhesive layer and the light-transmitting film, and an anti-blue light layer is provided on the upper surface of the light-transmitting film. After adding anti-blue light performance, the product's ultraviolet resistance strength: the yellowing will not exceed 10% over 72 hours, which can ensure that the product will not yellow or turn white after long-term use (>5 years). lt effectively reduces the blue light of LED modules, which is beneficial to human eye health. lt has strong light transmittance and super consistency.lt can achieve the same appearance color for thousands to tens of thousands of square meters, with consistent light emission and no display appearance color difference.

Non-reflective surface: Uses a matte finish with consistent glue thickness (<0.1mm), ensuring no visible splicing lines or reflections.

The principle of height limit is used to ensure the consistency of each module. The thickness of the glue layer is uniform and consistent. The flatness of the glue surface is not higher than 0.1MM. The difference in coating of the same batch of modules is not more than 5 wires, and the modules will not change with each other. lt becomes different in thickness due to deformation, and extremely fine splicing lines, and the surface is matte and roughened and does not reflect light.

UV resistance and low attenuation: Maintains LED brightness and color accuracy, with a 168-hour attenuation rate of <2%.

All-round sealing protection maintains a stable working temperature environment for LED devices. High -quality raw materials have good heat dissipation functions. The 168H attenuation rate is <2%. lt will not reduce the brightness or color after long-term work, and maintain the display protection of the LED display. authenticity, effectively improving product relia bility.

Easy maintenance: No repair traces, no yellowing, no bumps or weld marks. Cleaning is simple—stains and scratches can be removed with an alcohol wipe.

Maintainability, convenient maintenance, no yellowing, bumps. weld marks and other repair sequelae at the lamp repair area; invisible repair, the surface is brand new and smooth. Cleaning is easy. Use a lint-free cloth dipped in alcohol to wipe away oily, water-based, stubborn stains and even shallow scratches. lt is super anti-stain and can be wiped clean with just one wipe. lt can easily remove stains and leave no trace.

Testing standard: (pencil method) 1S015184

Test results: Wear resistance 3H (PASS)

First-grade tactile surface with high wear resistance